How to Use DeoGo

How to use Deo-Go

1. Check first

It is important that you always test for colour-fastness before use on your garments. Spot test an inconspicuous area and thoroughly inspect for any signs of discolouration.

Test on a hem or shirt tail or inside the collar of the garment by applying a penny sized spot of Deo-Go. Wait a minute, then rinse the area with water. Inspect the garment for any signs of discoloration. If there is any doubt, dry the area and inspect again.

2. Spray ’n scrub

Turn your garment inside out. Spray directly on to the stains, ensuring both sides of the fabric are fully saturated. Scrub with a short bristle brush and leave to soak for a minimum of 30 minutes. For those tougher stains, give them another scrub during the soak time and apply a little more Deo-Go if required.

As a guide, use around 10 sprays on each armpit area to ensure good coverage and fabric saturation.

When scrubbing, pay particular attention to the inside seams and any areas of heavy staining.

If the fabric begins to dry before the end of the soak period, spray a little more Deo-Go on to the stain to keep it wet and active.

3. Machine it

Wash your garment (separately from other untreated items) as per the normal washing instructions. If any stain remains, repeat the treatment.

Do not wash your treated item with any clothing that has not been previously spot tested for colour fastness. However, you can wash multiple garments together if you treating more than one at the same time.

After washing, inspect the previously stained area (it may help to hold your clothing up in front of a bright light or window) and prepare to be amazed!

If any stain remains, repeat the treatment, preferably while the fabric is still damp.

Precautions

Deo-Go can react with certain fabric dyes, permanently discolouring them. It is important to always test for colour-fastness when using Deo-go on coloured fabrics.

Keep out of reach of children and pets.

Don’t leave on unprotected surfaces (especially stainless steel) for prolonged periods, and always clean surfaces after use. Do not use on lacquered or varnished surfaces or porous materials e.g. marble or stone. Do not use on suede or leather, or garments with a special finish.

Wear suitable protective clothing.

Avoid contact with skin and eyes – In case of contact with eyes, rinse immediately with water for several minutes. Remove contact lenses if present and easy to do and continue rinsing. If on skin, wash with plenty of water. If swallowed, rinse mouth, do not induce vomiting and seek medical advice.

Deo-Go should be stored and used at room temperature. Keep in the original container. Do not mix or use with any other cleaning products.

Please visit the Deo-Go website at www.deogoaustralia.com.au